Dual Cab Steel Tray | 1.7m x 1.8m (5.9′ x 5.6′)
If you are looking to save money or simply need something stronger than a mass-produced/imported Ute tray, our Steel tray plans provide every detail and dimension you need to be able to build your own high strength long-lasting tray to complement your vehicle.
These plans will suit any space cab or dual cab ute. They feature a sliding chassis mounting system that allows you to adjust the mounting position to suit your vehicle before fixing in place and, can be refitted to any other vehicle so you can keep the tray when you upgrade!
The plans feature quick-release removable sides allowing either flatbed or enclosed tray configuration. Side steps on both sides allow easy climbing access to the tray or an additional tie-down point.
Throughout the 29 pages, we detail the general arrangement views that show where each part goes, length, material type, all dimensions and a number of section and detail views showing close up details of smaller parts or features.
Each individual part is then further detailed in its own part drawing where any holes are dimensioned, including size and location as well as notches or end treatments.
|Tray size:||1700mm (L) x 1800mm (W)||5.6′ x 5.9′ (feet)|
|Tray depth:||300mm||1′ (feet)|
|File sizes:||PDF | 3 MB (.pdf)||DXF | 565 KB (.zip)|
All our plans are designed to be easy-to-follow allowing just about anyone to tackle their own build. That being said, not all fabrication tasks are equal. Some will require you to use tools that the home workshop may not have.
Fabrication skill level: Basic.
ESTIMATED BUILD TIME:
This plan set comes with 29 pages of detailed drawings to help guide you through your build.
The plans are broken down into four assemblies:
- Tray Chassis Assembly
- Side Gate Assembly
- Tail Gate Assembly
- Chassis Mount Assembly
Included are part lists which help you identify what is required for each section of the build.
JOIN OUR PRIVATE FACEBOOK GROUP
Once you have purchased a set of plans, you are invited to join our Private Facebook Group. Here you can share your build and get help from other fabricators who have done it all before! We want you to have the support you need to not just start, but to finish your trailer or ute tray build.