8x5 Hydraulic Tipping Trailer Plans - 2000kg capacity - 38 Pages
- Tray Size: 8'x5' (2500mm x 1700mm)
- Tray Height: 600mm from ground level
- Overall size (inc coupling): 3500mm x 2050mm
- GTM (Total mass of trailer + full load): 2000kg
- Tare weight (Trailer only mass): 450kg
- Suspension: Tandem leaf spring with brakes
- Extras: Free toolbox drawings, Hydraulic ram drawings.
Total pages: 38 PDF drawings (dimensions in mm)
- DXF files: 20 DXF files
These easy to follow trailer plans feature 38 pages of high quality, fully dimensioned fabrication drawings including an itemized Bill of Materials (BoM) and a detailed cut list to be used for ordering the steel members and correct parts.
This Hydraulic tipping trailer utilizes a 4 stage Hydraulic ram kit which is fully detailed in our drawings to ensure the ram you choose is compatible with the chassis design.
A tipping angle of 45deg is achievable with a 620mm stroke with greater angles an option if your hydraulic ram kit allows a longer stroke.
8 pages of fabrication plans for the drawbar toolbox along with .DXF files for each part are included, you also have the option of mounting a store-bought toolbox if you prefer.
If you're not too familiar with fabrication plans or blueprints, we've created a number of tips and guides on how to understand the trailer plans including descriptions and info on symbols or abbreviations used and how to follow them accurately and confidently.
This means that navigating the trailer plans should be a breeze regardless of your experience or skill level.
With our Hydraulic tipping trailer plans, each sheet and plate part is also conveniently included as a DXF file, giving you the option of laser/profile cutting or water-jet cutting your parts.
We recommend printing these trailer plans to A4 or A3 paper for best ease of use.
Great care has been taken to engineer these plans to comply with all road and safety standards.and to ensure you get a quality build that will outlast any imported trailer of the same type.
An approximate indication of required components shown below, Prices and specs will vary based on the supplier.
Nice set of plans, only thing I couldn't find was a cutting list. I'm using to convert a standard 8x5 to tipper by cutting drawbar and suspension off then fabricating a new chassis to hinge the tub off. These plans are good as I can build a compliant chassis without worrying about it being approved during registration. I'd recommend their plans and the service seems good from what I experienced. Cheers guys, Adam Carwoola NSW
Very simple and a good laid out plan
Plans are easy to follow have started making the trailer.
the plans are very good i did make a suggestion that you add a cut list for the top frame as well as the bottom frame as it was not in the plans sent. the person i spoke to said he would review the plans and update the file.